[1]李世文,田雷,田昱,等.基于有限元法的贮液瓶跌落响应特性提取方法[J].如何下载365bet_365bet大小盘什么意思_365bet亚洲版官网,2019,41(03):87.[doi:.]
 LI Shiwen,TIAN Lei,TIAN Yu,et al.Liquid Storage Bottle Drop Response Characteristics Extraction Based on the Finite Element Method[J].,2019,41(03):87.[doi:.]
点击复制

基于有限元法的贮液瓶跌落响应特性提取方法()
分享到:

《如何下载365bet_365bet大小盘什么意思_365bet亚洲版官网》[ISSN:1008-1194/CN:61-1316/TJ]

卷:
41
期数:
2019年03
页码:
87
栏目:
出版日期:
2019-06-24

文章信息/Info

Title:
Liquid Storage Bottle Drop Response Characteristics Extraction Based on the Finite Element Method
文章编号:
1008-1194(2019)03-0087-06
作者:
李世文;?田雷;?田昱;?许曼佳;?张震
西安机电信息技术研究所,陕西 西安 710065
Author(s):
LI Shiwen;? TIAN Lei;? TIAN Yu;? XU Manjia;? ZHANG Zhen
Xi’an Institute of Electromechanical Information Technology, Xi’an 710065, China
关键词:
引信化学电源;?贮液瓶;?跌落试验;?有限元法;?应力变化;?特性提取
Keywords:
fuze chemical power;? liquid storage bottle;? drop test;? finite element method;? stress change;? characteristic extraction
分类号:
TJ43
DOI:
.
文献标志码:
A
摘要:
针对目前无法对引信电源贮液瓶跌落过程内部现象和特性进行提取并观察分析的现状,提出了基于有限元法的引信电源贮液瓶跌落响应特性提取方法。该方法利用有限元法中的任意拉格朗日欧拉算法结合ANSYS/LS_DYNA软件对跌落响应过程进行特征提取,可以清晰地提取贮液瓶整个跌落过程中的应力变化等内部微观变化及特性。实例验证及跌落试验结果表明,该方法可以提取贮液瓶跌落过程响应特征,清晰地观察整个贮液瓶跌落过程中应力变化等微观变化,安全跌落高度判定准确率达97%。
Abstract:
During the fuze power storage bottle drop process, the internal phenomena and characteristics can not be extracted and observed and analyzed by existing methods, a new method based on finite element method for extracting the drop response characteristics of liquid storage bottle of fuze power was proposed. The method used the Arbitrary Lagrange-Euler in the finite element method combined with ANSYS/LS_DYNA software to extract the feature of the drop response process, which could clearly extract the internal microscopic changes and characteristics such as the stress change during the whole drop process of the liquid storage bottle. The results of example verification and drop test showed that the method not only could extract the response characteristics of the liquid bottle drop process, but also could clearly observe the microscopic changes such as stress changes during the whole process of the liquid bottle drop test. The accuracy of the evaluation of safety drop height reached 97%.

参考文献/References:

[1]王炜,刘更,韩冰,等.引信贮液瓶冲击特性研究[J].机械与科学技术,2007,26(8):1090-1092.
[2]王炜.引信贮液瓶结构屈曲分析与冲击特性研究[D].西安:西北工业大学,2007.
[3]李世文,王莹澈,李仁杰,等.考虑扭转力矩的塑料贮液瓶薄弱环节尺寸设计方法[J].如何下载365bet_365bet大小盘什么意思_365bet亚洲版官网,2012,34(1):33-36.
[4]宁剑平,王冰,周彬,等.引信跌落安全性检验的虚拟实验技术[J].物流科技,2010,33:(7)71-74.
[5]郑菲,郑才国.跌落过程中焊点的有限元模拟[J].机械设计与制造,2015(6):52-54.
[6]李萌,鲁宁,李佳德.工控设备缓冲包装跌落试验及其仿真分析[J].包装工程,2015(5):74-78.
[7]郝好山,胡仁喜,康士延.ANSYS 12.0 LS-DYNA非线性有限元分析从入门到精髓[M].北京:机械工业出版社,2010.
[8]尚晓江.ANSYS/LS-DYNA动力分析方法与工程实例[M].北京:中国水利水电出版社,2006.

备注/Memo

备注/Memo:
收稿日期:2018-12-25
作者简介:李世文(1985—),男,江西赣州人,硕士,研究方向:引信电源设计与测试。E-mail:lswnwpu@163.com。
更新日期/Last Update: 2019-07-11